Search Catalog   By Item #By Keyword         All Categories    PolyFlex 5050 All Categories > Waterproofing Membranes > PolyFlex 5050 > Item # PolyFlex-5050   Item # PolyFlex-5050 PolyFlex-5050     Printable Page       Email This Page       Save To Favorites    larger image PolyFlex-5050 Flexible epoxy control joint sealer/adhesive PolyFlex-5050 is a 100% solid epoxy system which is primarily used as a sealer and filler for masonery, saw cut control joints and grooves. PolyFlex-5050 is a unique epoxy system which is moisture insensitive, flexible and self levelling.  PROPERTIES   USES   GRADES   MIXING    APPLICATION   CLEANING   PACKAGING   COVERAGE    Tests Results Test Method   40 minutes ASHTDT-237  Pot life        Curing Temperature Limit  40°F and up.           Initial Set Time @ 75°F 6-8 hours.         Final Cure Time @ 75°F  3 days         Mixing Ratio by volume  1 Base : 1 Hardener.           Mixed Viscosity @ 75°F 4000-5000 CPS ASTMD-2393        Mixed viscosity @ 75°F for Gun Grade Gel         Tensile Strength 400-600 PSI ASTMD-638        Tensile Elongation 100-120% ASTMD-638        Shore A Hardness  80 ± 10   ASTMD-2040      Bond To Concrete 220-265 PSI ASTM C-321     Water Absorption  0.19% ASTM C-413       Abrasion Resistance  0.18 gm. max.   ASTMD-1044 C-10 Wheel,1000 gm. load 1000 cycles.       Chemical Resistance  Passes Good chemical resistance against mild acids, alkalies, petroleum based fuels and steam. For specific requirements contact Delta Polymers, Inc.  MIL D-3134