Search Catalog   By Item #By Keyword         All Categories    PolyKrete 222 All Categories > Structural Adhesives, Overlays & Patching > PolyKrete 222  > Item # PolyKrete-222   Item # PolyKrete-222 PolyKrete-222     Printable Page       Email This Page       Save To Favorites    larger image PolyKrete-222 Epoxy Liquid Binder Fast Setting / Low Temperature PolyKrete-222 is a two component, 100% solid epoxy system. It is high modulous, moisture insensitive and low temperature (30°F) curing system. It is used as a coating, resurfacing or repair in areas where low down time is required. At 30°F - 35°F it will yield a hard, dense, abrasion resistant surface. Above 65°F PolyKrete-222 treated surface can be opened up to traffic in as little time as three hours. 1- PolyKrete-222 is a low viscosity, high modulous adhesive and mortar binder for horizantal surfaces. 2- PolyKrete-222 Gel is a non-sag gel for vertical and overhead repairs of structural concrete, wood or steel.  PROPERTIES   FEATURES   USES   CHEMICAL RESISTANCE   SURFACE PREPARATION   MIXING   APPLICATION   MORTAR   POLYKRETE-222 GEL    Tests Results Test Method   PolyKrete-222 | PolyKrete Gel   Mixing Ratio ( Base:Hardener )  2:1 | 2:1       Pot Life  15 min | 15 min         Cure Time 2 hours | 2 hours          Cure Time Mortar    3 Hours | 3 Hours          Tensile Strength (Neat) PSI   5000 PSI | 5000 PSI          Tensile Elongation %  1-2% | 1-2%           Tensile Modulous PSI  400,000 PSI | 400,000 PSI         Tensile Strength (Mortar)   2140 PSI | 2140 PSI  ASTMC-307       Compressive Strength (Neat) 10500 PSI | 10500 PSI         Compressive Strength (Mortar)  11500 PSI | 11500 PSI         Compressive Modulous 250000-400000 PSI | 250000-400000 PSI       Flexural Strength 4500 PSI | 4500 PSI       Hardness Shore D  85-90 85-90         Abrasion Resistance   0.19 gm. Max. | 0.19 gm. Max.  ASTMD-1044        Colors   Various Colors | Various Colors