Item # PolyKrete MP, PolyKrete MP on Delta Polymers, Inc.


All Categories > Flooring > PolyKrete MP > Item # PolyKrete MP


	Item # PolyKrete MP PolyKrete MP

Printable Page

Email This Page

Save To Favorites

larger image

PolyKrete MP
Three Component Multipurpose Epoxy Flooring System
PolyKrete MP is a three component epoxy system which consists of epoxy resin, hardener and selected graded aggregates. It is highly chemical resistant, abrasion resistant and has superior impact resistance. PolyKrete MP is moisture insensitive and is used as an overlay on new floors or to repair and restore old worn surfaces.

PROPERTIES

USES

CHEMICAL RESISTANCE

Chemical Resistance of PolyKrete MP

KEY

SURFACE PREPARATION

FINISHED SURFACE

COVE BASE

PACKAGING

Epoxy resin and epoxy hardener are mixed 2:1 by volume. To each part of mixed epoxy, three parts of aggregates are added by volume. Mixed thoroughly and make samples. Cure these samples for seven days and check them according to ASTM tests.

Tests	Results	Test Method
	400-600	ASTMD-2930
Mixed Viscosity (Part A & part B)

Pot life	35-45	ASHTO-T-237


Initial Cure @ 75°F	6 hours


Tensile Strength	5000 PSI Min	ASTMD-638


Tensile Elongation	1-2%	ASTMD-638


Tensile Strength (Mortar)	1850 PSI	ASTMC-307


Compressive strength (Mortar)	11000 PSI	ASTMC-579


Flexural Strength	4000 PSI	ASTMC-580


Flexural Modulous of Elasticity	2.0 X 106 PSI	ASTMD-790


Bond Strength	Concrete Failed


Indentation	None	MIL-3134F


Abrasion Resistance	0.09 gm.	ASTMD-1044


Water absorption	0.08%	ASTMC-413


Thermal Coefficient of Linear Expansion	3.5 X 10-5 in/in/°F	ASTMD-696


Coefficient of Friction	0.55	ASTMD-2047


Heat Exposure	Continuous 145°F


Intermittent Spills	200°F


Heat Deflection Temperature	154°F	ASTD-648


Fungus & Bacteria Resistance	Will not support growth of fungus or bacteria	MIL-F-5205 Sec 4.4.2.11

Item # PolyKrete MP PolyKrete MP