Search Catalog   By Item #By Keyword         All Categories    Polythane 1005 All Categories > Coatings > Polythane 1005 > Item # Polythane 1005   Item # Polythane 1005 Polythane 1005     Printable Page       Email This Page       Save To Favorites    larger image Polythane 1005 A revolutionary new type of Aliphatic Polyurethane coating. The Uniqueness of this coating is that for the first time the toughness and durability of Polyurethane is available in a coating which is high build, glossy finish, attractive top coat having excellent resistance to Acids, Alkalines, fumes, solvents, salts, sea water, water and other chemicals. Polythane meets the highest demands of weather resistance, color stability, gloss retention, chalk resistance as well as scratch and abrasion resistance.  PROPERTIES   RECOMMENDED USES   ADVANTAGES   SURFACE PREPARATION   PRIMERS   CLEAN UP   CHEMICAL RESISTANCE    Tests Results Test Method   6575 PSI ASTMD-638 Tensile Strength       Tensile Elongation 100% ASTMD-638       Adhesion 5B, Average 100 PSI ASTMD-3359 Tested on aluminum, Steel, Concrete, Wood.     Tack Free Time @ 75°F 5 & 50% R.H. hrs 5 Hours       Tack free time @ 75°F 3 & 50% R.H. hrs (with catalyst) 3 Hours       Initial Cure Hours 24 Hours         Final Cure Hours 48 Hours         Hardness 60 Shore D ASTMD-412       Abrasion Resistance 3mg Loss CS-17 wheel, 1 kg Pressure, 1000 cycles.     Flexibility Excellent ASTMD-522 1/8" Mandrel       Impact Resistance Direct Passed 160 lbs. sq/in       Impact Resistance Reverse Passed 160 lbs. sq/in       Weatherability Excellent 2000 hrs. Q.U.V.       Viscosity @ 75° F 150-350 ASTMD-2392       Solids %(Clear) 50 + 2           Solids %(Pigmented) 65 + 2           Mixing Ration By Volume 2 Part Base (part A) 1 Part Hardener (part B)         Application Roll spray or brush           Coverage 200-300 sq. ft./gallon The coverage may vary with the Condition of the substrate         Dry Film Thickness Per Coat 4-6 Mils.