Search Catalog   By Item #By Keyword         All Categories    PolyGrip 1030 All Categories > Coatings > PolyGrip 1030  > Item # PolyGrip-1030   Item # PolyGrip-1030 PolyGrip-1030     Printable Page       Email This Page       Save To Favorites    larger image PolyGrip-1030 Non-slip, 100% solid epoxy textured safety coating PolyGrip - 1030 is a 100% solid epoxy system. It does not contain any solvents yet can be applied with a brush, roller or trowel. It contains a unique blend of agregates that provides a uniform non-skid safety surface. It is moisture insensitive and therefore can be applied to damp surfaces. It is available in two grades: Standard Texture and Fine Texture.  PROPERTIES   USES   COVERAGE    SURFACE PREPARATION   THINNING OF THE MATERIAL   MIXING & APPLICATION    TEMPERATURE LIMITATION   PACKAGING    Tests Results Test Method   50 - 60 min  ASHTO-T-237  Pot Life @ 75°F        Curing Temperature Limits  40°F & up             Initial Set Time  6 - 8 Hours              Mixing Ratio by Volume  4:01           Application   Trowel, Brush, Roll             Viscosity ~ 75°F  4000-5000 CPS  ASTMD-2393       Thixotropic Index  1.3            Compressive Modulus  485,000 PSI Min.  ASTMD-695        Tensile Strength  5000 - 7000 PSI  ASTMD-638        Tensile Elongation  1-2%  ASTMD-638        Tensile Strength Mortar  2180 PSI  ASTMC-307        Compressive Strength  12500 PSI  ASTMD-695 M        Flexural Strength  4700 PSI  ASTMD-580         Hardness  85-88 Shore D  ASTMD-2240         Bond Strength  100% Concrete Failure  ASTMC-882         Indentation  NONE  MIL-3134F          Flammability  Self extinguishinq by this test as determined with a backing of concrete.   ASTMD-635       Water Absorption   Max .08  ASTMC-413       Fungus Or Bacteria Resistance   Does not support growth of fungus or bacteria when subjected to mildew and bacteria test specified in T-T-P-34.   MIL-F-52505, T-T-P-34       Resistance To Elevated Temperature   No-slip or flow @required temperature of 158°F.   MIL-D-3134 F SEC4.7.5